Friday, June 6, 2014

DIY Decoupage Gold Embossed Wood Disc Earrings

decoupage earrings


DIY Decoupage art jewelry earrings with gold embossing.  I had a bunch wood discs left over from another project so I thought what better way to use them up along with my scrap decoupage paper. 
I used my Sun and Moon Glaze for the decoupage glue but you can use Mod Podge. It has been years since I've done any stamping so this was an experiment. I found this cool stamp at JoAnn's; most stamps are too big for jewelry but I thought I could use sections of it. I also grabbed a Perfect Pearls embossing kit hoping this would work:



I had no idea if my idea was going to work, I googled but couldn't find any info on how to make the Perfect Pearls permanent for jewelry.  I've used powders on poly clay but not stamped! When my decoupaged discs were dry I just took the Perfect Medium, a clear but sticky "ink",  and patted it onto an area of my stamp. I then carefully pressed the disc onto the stamp without moving or smudging, then lifted it off.  At this point you can't see a thing but then I took the bigger soft brush that came with my kit and patted on a little of the Perfect Pearls gold powder, brushed it off and like magic the gold letters appeared:



So that looked great... but I've never had luck with sealing metallic paints; Krylon spray would cause things to run or the shimmer would go away so I was a bit nervous. I found in my closet, a sealer by Speedball made for gold leaf so I thought I would give it a try:

sealing gold embossed jewelry

I thought maybe three very LIGHT coats may do the job and just maybe the gold wont run. So I  sprayed.....and a big blob of spray came out!!! Sure it was old and was in my closet for years!  I thought I ruined my earrings but I continued to spray the big blobs until everything looked evenly coated.  Okay,  they didn't run but will they become a goopy mess? Maybe the glaze and this spray aren't compatible like what usually happens to me so I left them to dry. I went back and checked them after maybe twenty minutes and they were completely rock hard and dry!  I will getting more of this spray sealer!  I drilled the holes, added some beads and earring wires and what do you think? I may make more! If you don't want to take all of the time to make these you can find them in my Etsy shop: (just click on the photo below)


decoupage earrings


See my other Decoupage Earrings DIY using old maps!

For more DIY jewelry tutorials follow my Pinterest board: DIY Jewelry Tutorials


If you have any crafts,  decoupage or gold embossing tips let us know! All comments are welcomed below:

4 comments:

  1. So pretty! I love the colors - well done!

    ReplyDelete
    Replies
    1. stylesavvydfw, Thanks so much, I think I will make blue next with my new paisley stamp!

      Delete
  2. Hi how do you put the ear wires so that the front of the earring always shows when worn? The ones I've made the disc end up turning around and the back of the disc is visible. I hope you understand my question!

    ReplyDelete
    Replies
    1. chantel, they do twirl on the ear but front remains the front...can you get a good look at the top photo? I have one big jump ring coming from the disc, then you can either add another jump ring or do what I did with the bead, making sure the loops are perfectly straight. I think you may just need to add another jump ring!

      Delete